| Type | Flanged | ||||||||
| Size of Valve (mm) | 15 | 20 | 25 | 40 | 50 | 80 | 100 | 150 | 200 |
| Material (Body) | Cast Steel/ Cast Iron/ Stainless Steel | ||||||||
| Internal Parts | Stainless Steel | ||||||||
These valves are used for the purpose of reducing the downstream pressure and are used for steam, oil, air and other gases
Flanges drilled according to BS 10 Table H or J. Can be supplied with other flanges against order
Can be supplied with IBR certificate in Form III-C
| Type | Screwed/Flanged | Flanged | |||||||
| Size of Valve (mm) | 10 | 15 | 20 | 25 | 40 | 50 | 80 | 100 | 150 |
| Material (Body) | Cast Steel/ Cast Iron/ Stainless Steel | ||||||||
| Internal Parts | Stainless Steel | ||||||||
These valves are used in processing industries for steam, air or other fluids. Suitable for operation for simple on and off duty, using solenoid valve, or with pneumatic controllers with 3-15 psi loading pressure or as a direct operated regulator for controlled pressure up to 30 psi.
Flanges drilled according to BS 10 Table H or J. Can be supplied with other flanges against order
Can be supplied with IBR certificate in Form III-C
The valve can be supplied with integral controllers, to work as an “Upstream Pressure Control Valve” or as a “Downstream Control Valve” in cast steel body for pressures of 40 bar and 400 degrees centigrade.
| Type | Flanged | ||||||||
| Size of Valve (mm) | 40 | 50 | 80 | 100 | 150 | ||||
| Material (Body) | Cast Steel/ Cast Iron/ Stainless Steel | ||||||||
| Internal Parts | Stainless Steel | ||||||||
These valves are used in processing industries for steam, air or other fluids. Suitable for operation for simple on and off duty, using solenoid valve, or with pneumatic controllers with 3-15 psi loading pressure or as a direct operated regulator for controlled pressure up to 30 psi.
Flanges drilled according to BS 10 Table H or J. Can be supplied with other flanges against order
The valve can be supplied with integral controllers, to work as an “Upstream Pressure Control Valve” or as a “Downstream Control Valve” in cast steel body for pressures of 40 bar and 400 degrees centigrade.
| Type | Flanged | ||||||||
| Size of Valve (mm) | 6 | 10 | 15 | 20 | 25 | ||||
| Material (Body) | Cast Steel/ Cast Iron/ Stainless Steel | ||||||||
| Internal Parts | Stainless Steel | ||||||||
These valves are used in processing industries for steam, air or other fluids.
| Type | Screwed/Flanged | Flanged | |||||||
| Size of Valve (mm) | 15 | 20 | 25 | 40 | 50 | 80 | |||
| Material (Body) | Cast Steel/ Cast Iron/ Stainless Steel | ||||||||
| Internal Parts | Stainless Steel | ||||||||
These valves are used in processing industries for steam, air or other fluids. Suitable for operation, for simple on and off duty, using solenoid valve.
Flanges drilled according to BS 10 Table H or J. Can be supplied with other flanges against order
| Type | Screwed Ends | ||||||||
| Size of Valve (mm) | 15 | 20 | 25 | ||||||
| Material (Body) | Stainless Steel Forging | ||||||||
| Internal Parts | Stainless Steel | ||||||||
The trap works on the thermo dynamic principle
Provided with inbuilt strainer of stainless steel or brass
Has only one moving part – A hardened stainless steel disc
Withstands effect of corrosion, superheat, vibration etc
It gives blast discharge and clean cut off.
Copyright © 2018 All Rights Reserved
